What is your standard lead time ?
Our standard lead time is approximately 8 weeks. This time could vary depending
on the work volume. Consult the factory for current lead times.
Is it possible to get a bushing or
toolholder in a rush because of a break down ?
Yes, Gatco will expedite delivery if a customer has a break down.
Can I get a price list ?
No, Gatco does not publish a price lists, but if called, we will quote you immediately
over the phone and will confirm price by fax. if requested.
If I cannot find a bushing or
toolholder to fit my application in the catalog can Gatco design a special ?
Yes, Gatco can normally provide a special design proposal within twenty four
hours.
Does a special design cost more than a
standard. Also is the lead time longer than a standard ?
Special designs are normally in line with the cost of a standard depending on how complex
the design. The lead time on a special is the same as on a standard product.
If I have an immediate engineering
question is there someone there to answer it ?
Yes, Gatco can provide immediate over the phone engineering assistance.
Can a sales representative call on me
?
Yes, Gatco employs outside salesmen to service our domestic customers. For sales outside
the U.S., Gatco will provide direct service through sales representatives.
Why is counter clock wise rotation on
bushings optional as stated in the catalog ?
Rotary bushings can rotate in either direction. We ask that you specify rotation due to
the construction of certain series. Some series have threaded members and require a
locking mechanism to prevent the parts from un-threading when rotated in a counter
clockwise rotation.
Should I use oil or grease lubrication
?
Either means of lubrication is acceptable, although at higher speeds oil lubrication may
be preferred to dissipate the heat.
I have an application where I need
closer size and runout tolerances other than what is standard in the catalog. Can I
request closer tolerances ?
Yes, Gatco can hold precision size and runout tolerances to suit any application.
Does Gatco repair rotary bushings and
toolholders ?
Yes, all Gatco products can be rebuilt. A unit rebuilt by Gatco restores the rotary
bushing or toolholder to it’s original runout, I.D. size, and life expectancy.
Can Gatco rebuild other manufacturers
products ?
Yes, we can rebuild any rotary bushing, toolholder , floating holder or line bore supports
manufactured by other company’s.
Is rebuilding cost effective ?
Yes, a Gatco rotary bushing can be rebuilt any number of times. The average cost savings
over purchasing new is approximately 40% to %50%.
How long should my bushing or
toolholder last before repair ?
In general a unit should run approximately 5000 hours based on bearing manufacturers
averages. The given application and other conditions may modify this average limitation
one way or the other.
Does Gatco provide an electronic
catalog ?
Gatco currently offers an electronic library of standard products in Auto-Cad format.
Contact Gatco for your copy.
Does Gatco have a metric catalog ?
Yes Gatco offers standard rotary bushings and toolholders in inch as well as metric sizes.
How can I be sure Gatco is a reliable
supplier of quality products ?
Gatco has been servicing the metal working industry since 1913. We have been recognized by
Ford Motor Co. , Daimler Chrysler and General Motors as a quality supplier. We are also
currently working to achieve QS9000 certification.
